• 大家都在搜: 不锈钢酒店装饰玻璃空透隔断 不锈钢金属工程玄关走道屏风 不锈钢酒店装饰中式屏风 不锈钢金属工程不锈钢橱柜 不锈钢花纹屏风镀钛
  • 18763996167


  • 全国咨询热线
联系我们
服务热线
18763996167
座机:0531-88275278 
邮箱: 279546205@qq.com
地址:山东省济南市天桥区大桥街道办事处倪家村136号
当前位置:首页-新闻资讯>行业新闻>不锈钢金属工程的验收流程都有哪些?

不锈钢金属工程的验收流程都有哪些?

来源:http://www.sdshbxg.com 日期:2020-03-26 发布人:admin
  现在很多人喜欢用不锈钢门作为进入门的门的门,因为不锈钢门不仅外表美观的设计多样,也有一定的质量和安全保障。不锈钢门的质量担忧的安全,所以我们需要检查的整体外观门当我们收到所需的不锈钢门,安装好后,必须检查并接受它,接受以下几个标准的不锈钢门。
  Now many people like to use stainless steel door as the door to enter the door, because stainless steel door not only has beautiful appearance and diverse design, but also has certain quality and safety assurance. The quality of stainless steel door is worried about safety, so we need to check the overall appearance of the door when we receive the required stainless steel door, after installation, we must check and accept it, and accept the following standards of stainless steel door.
  1. 门框检验
  1. Door frame inspection
  门框安装是否牢固周正,门框与墙体连接是否密封严密,门面有无开裂、断裂等情况。
  Whether the door frame is installed firmly and properly, whether the connection between the door frame and the wall is sealed tightly, and whether the door surface is cracked or broken.
  2. 门检查
  2. door inspection
  门扇有无开裂、变形等问题,漆面有无流动滴漏刷和凹凸,表面是否平整,无明显划痕,距离地面是否考虑预留地面布置。
  Whether the door leaf is cracked or deformed, whether the paint surface is flowing, dripping, leaking, concave and convex, whether the surface is flat and free of obvious scratches, and whether the reserved ground layout is considered for the distance from the ground.
  3.门锁检查
  3. Door lock inspection
  锁安装牢固,锁紧均匀,钥匙插拔平稳,锁芯转动灵活,锁孔位置正常。
  The lock shall be installed firmly, locked evenly, the key shall be inserted and pulled smoothly, the lock cylinder shall rotate flexibly, and the lock hole position shall be normal.
  4. 打开和关闭门检查
  4. Open and close the door for inspection
  门的开启和关闭是否顺畅,是否有异常的阻力,是否有异常的声音和磨损,锁上后是否稳定,无晃动。
  Whether the opening and closing of the door are smooth, whether there is abnormal resistance, whether there is abnormal sound and wear, whether it is stable after locking, and whether there is no shaking.
  5. 门把手检查
  5. Door handle inspection
  门把手安装牢固,转动时无异常阻力,无缺陷,表面无变形。
不锈钢金属工程
  The door handle shall be installed firmly, without abnormal resistance, defect and deformation on the surface during rotation.
  6. 铰链(合页)检查
  6. Hinge (hinge) inspection
  合页是否完整、牢固、转动平稳。
  Whether the hinge is complete, firm and rotates smoothly.
  7. 检查其他五个配件
  7. Check the other five accessories
  检查门体及各种五金配件是否齐全牢固。
  Check whether the door body and various hardware accessories are complete and firm.
  按照以上步骤,可以检验出一扇不锈钢门的质量是否合格。
  According to the above steps, the quality of a stainless steel door can be inspected.
  以上就是对不锈钢金属工程验收流程的详细介绍,想要了解更多请点击官网http://www.sdshbxg.com/
  The above is a detailed introduction to the acceptance process of stainless steel metal works. For more information, please click http://www.sdshbxg.com/