• 大家都在搜: 不锈钢酒店装饰玻璃空透隔断 不锈钢金属工程玄关走道屏风 不锈钢酒店装饰中式屏风 不锈钢金属工程不锈钢橱柜 不锈钢花纹屏风镀钛
  • 18763996167


  • 全国咨询热线
联系我们
服务热线
18763996167
座机:0531-88275278 
邮箱: 279546205@qq.com
地址:山东省济南市天桥区大桥街道办事处倪家村136号
当前位置:首页-新闻资讯>公司动态>不锈钢镀钛过程中如何避免失误的发生?

不锈钢镀钛过程中如何避免失误的发生?

来源:http://www.sdshbxg.com 日期:2020-03-13 发布人:admin
不锈钢镀钛表面处理是一个非常流行,特别是在不锈钢丝网,不锈钢分区,不锈钢酒架和其他应用程序非常多,可以直接说,很多人不理解镀钛。
  Stainless steel titanium plating is a very popular surface treatment, especially in stainless steel wire mesh, stainless steel partition, stainless steel wine rack and other applications, it can be said that many people do not understand titanium plating.
  玫瑰金、钛金、黑钛、香槟金等颜色,均采用电镀钛的方式加工而成。虽然你可以使不锈钢的表面很漂亮,但是在加工的过程中有很多东西要注意,如果你不注意的话,产品的电镀会出现各种各样的缺陷。
  Rose gold, titanium gold, black titanium, champagne gold and other colors are processed by the way of titanium plating. Although you can make the surface of stainless steel very beautiful, there are many things to pay attention to in the process of processing. If you don't pay attention, there will be various defects in the electroplating of products.
不锈钢镀钛
  不锈钢镀钛时的注意事项
  Precautions for titanium plating of stainless steel
  在电镀时,不锈钢网基材与不锈钢网镀层之间存在非不锈钢夹层,并不能形成连续的晶体结构,导致镀层起泡或脱落等不良结合的缺陷。因此,变质层如氧化物、铁锈和氧化物必须彻底清除。虽然是加工层,但涂层可以与之牢固结合,所以不需要用蚀刻法除去,一般只进行酸洗处理。
  During electroplating, there is a non stainless steel interlayer between the stainless steel mesh substrate and the stainless steel mesh coating, which can not form a continuous crystal structure, resulting in the coating blistering or falling off and other defects of poor combination. Therefore, the modified layer such as oxide, rust and oxide must be completely removed. Although it is a processing layer, but the coating can be firmly combined with it, so it does not need to be removed by etching, generally only pickling treatment.
  筛网材料储存在空气中,即使是很短的时间,散布在空气中的灰尘或油脂等颗粒,也会附着在表面并形成污垢层。
  When the screen material is stored in the air, even for a short time, the particles such as dust or grease scattered in the air will adhere to the surface and form a dirt layer.
  污水主要有两类:
  There are two main types of sewage:
  一是无机污物,包括磨料颗粒、空气中的粉尘和不锈钢网粉。另一种是有机污垢,包括动植物油、矿物油、混合油、热粘接剂和抛光膏残留物。在电镀时,即使是表面有一层微量的污垢残留,也会造成镀层结扎和剥落的缺陷,所以必须清除污垢层,这个过程叫做除油。
  One is inorganic dirt, including abrasive particles, dust in the air and stainless steel mesh powder. The other is organic dirt, including animal and vegetable oil, mineral oil, mixed oil, hot adhesive and polishing paste residue. In electroplating, even if there is a trace of dirt residue on the surface, it will cause the defect of coating ligation and peeling, so the dirt layer must be removed, this process is called degreasing.
  一般情况下,要注意避免在生产过程中对表面进行清洁,也要注意在生产过程中尽量保持空气质量,避免一些灰尘,灰尘多的地方要做镀钛处理。
  In general, it is necessary to avoid cleaning the surface in the production process, and also to keep the air quality as much as possible in the production process, avoid some dust, and titanium plating should be done in places with more dust.
  以上就是对不锈钢镀钛过程中的注意事项的详细介绍,想要了解更多请点击官网http://www.sdshbxg.com/
  The above is a detailed introduction of the precautions in the process of stainless steel titanium plating. For more information, please click http://www.sdshbxg.com/